Glazing, glass and mirrors cut to size
Tell us what broke or what you need made. We pass the enquiry to a glazing firm that works in your area, and you get a written quote stating the glass type, the edge finish and the lead time.

Glass is measured on site
The size for a replacement is taken once the glazing bead is lifted. Your photo and your own measurements are useful for orientation, not for ordering the pane.
You get the quote in writing
Glass type, edge finish, how it will be fitted and when. Not a single number in a text message that nobody can refer back to.
A glazing firm cuts and fits it
We pass the enquiry on. If we have no partner in your area, we say so straight away instead of leaving you waiting.
What a glazier can help you with
Five types of job that make up most glazing work. If yours fits none of them, describe it in your own words in the form.
Window and door glazing
A cracked or broken pane, a misted double glazing unit, glass replacement in timber, uPVC and aluminium frames.
MoreGlass cut to size
Cut float glass, toughened, laminated, heat-resistant glass and insulating units made to your dimensions and shape.
MoreMirrors made to size
Bathroom mirrors, mirror walls, non-standard shapes, polished or bevelled edges, cut-outs for light fittings.
MoreShower screens
Screens and doors in toughened glass made to size, including the hardware and a solution for uneven walls.
MoreShopfronts, infills and splashbacks
Broken shopfronts, door glazing, glass shelves, glass splashbacks behind a kitchen worktop.
MoreSomething else
Framing, picture glazing, an aquarium, a shelf, a non-standard shape. Describe the job in your own words and we will get back to you.
Write to usFour types of glass you choose between
This is the most common reason why two quotes for the same opening differ. It is not the price per square metre, it is the type of glass. The table says where each type is normally used and what to watch for when ordering.
| Glass type | Where it is normally used | How it behaves when broken | What to ask when ordering |
|---|---|---|---|
| Float (ordinary sheet glass) | Furniture infills, shelves out of reach, picture glazing, places with no impact risk. | Breaks into long sharp shards. | Whether it is acceptable at all in that place. Where impact or a fall is possible, a safety glass is normally required. |
| Toughened (tempered) | Shower screens, glass doors, shelves, splashbacks behind a kitchen worktop. | Shatters into small blunt fragments. | That it can no longer be cut or drilled once toughened. Every hole, cut-out and chamfer has to be in the brief beforehand. |
| Laminated (safety glass) | Balustrades, overhead glazing, places where the glass must not fall out once broken. | Cracks but holds together on the interlayer. | How many layers and which interlayer. For balustrades and overhead glazing this is normally set by the design, not by preference. |
| Insulating double or triple glazing | Windows, balcony doors, glazed walls. | Depends on which panes the unit is built from. | Whether swapping the whole unit is enough, or whether the spacer bar has failed and the misting will come back. |
What has to be used where is normally set by the standards and by the building design, not by a catalogue. We have the requirement for your particular place confirmed by the glazing firm. We deliberately give no thicknesses and no standard numbers here, because they vary with size, position and load.
How it works
Send the enquiry
What broke or what you need made, approximate dimensions, which floor, and a photo if you have one.
We fill in the details
We get in touch and ask about the frame type, access to the window and who will be there for the survey.
Survey and quote
The glazier measures the glass on site. You then get a written quote with the glass type, the edge finish and the lead time.
Making and fitting
The glass is cut and finished to size, then fitted and sealed. The firm normally takes the old material away.
Send us the glass sizes
An e-mail address is enough. Tell us what broke or what you need made, and add the dimensions even if they are only approximate.
- The more precise your dimensions, the more concrete the first answer will be.
- For broken glass, a photo of the whole window and a close-up of the frame helps.
- You pay nothing for the enquiry and nothing for turning the quote down.
- If we have no partner in your area, we will write and tell you.
What drives the price of glass
You will not find a price list here, and that is deliberate: a glass price is made up of six to eight items and a table of prices per square metre shows one of them. These are the parameters that move the final figure most.
- Glass type and thicknessFloat, toughened, laminated and an insulating unit are four different prices and four different lead times.
- Size and shapeA large pane needs more people to handle it. A non-standard shape, an arch or a cut corner is made from a template.
- Edge finishPlain cut, ground, polished or bevelled. A visible edge on a mirror or a shelf is treated differently from an edge hidden in a frame.
- Holes and cut-outsEvery hole for hardware, a socket or a light fitting has to be drilled before toughening and raises the risk of a reject.
- Surface finishAcid etching, sandblasting, back-painting on splashbacks, safety film.
- Access to the siteA floor with no lift, a narrow staircase, fitting from the outside or from a platform. This often matters more than the glass itself.
- Removal and disposalTaking the old glass out, removing the broken pieces and clearing up, plus temporary boarding where a pane is broken.
- Lead timeOrdinary float glass tends to be in stock. Toughened glass and insulating units are made to order, which moves both the date and the cost of hurrying.
Frequently asked questions
How much does it cost to replace glass in a window?
We do not give a price here, because it would not be truthful. For the same size of opening the figure differs depending on whether it is single glazing or an insulating unit, whether the glass is fitted from the inside or the outside, and what condition the frame is in. You get a concrete figure in writing after the survey, with no obligation.
How long does glass cut to size take to make?
It depends on the type. Ordinary float glass is normally cut from a sheet in stock. Toughened glass, laminated glass and insulating units are ordered from the factory, so there is a wait. The lead time should be written in the quote before you confirm anything.
Can I measure the glass myself?
For a first estimate yes, and it helps a lot. For ordering the pane, no. The size is taken once the glazing bead has been lifted, it is measured in several places, and the glazier deducts an allowance for seating and expansion. Glass ordered from a measurement taken over the outside of the frame usually does not fit.
Misted double glazing: replace the glass or the whole window?
Misting between the panes means the spacer bar of the unit has failed. It is normally solved by replacing the whole insulating unit, while the frame, the hardware and the sill stay. Replacing the whole window makes sense when the frame or the hardware has failed too.
Do I need permission to replace glass?
For a glass replacement in a flat or a house, normally not, because neither the appearance nor the structure changes. It can be different in a heritage zone, for shopfronts and for work affecting a facade. If that applies to your case, we have it checked with the firm before anything is ordered.
Will a glazier come out at night or at the weekend?
We do not promise a call-out in advance and we will not claim to be a round-the-clock service. Whether and when a glazing firm in your area turns up is their decision. What we can promise is a quick reply and an honest answer if we have nobody in your area. Until the glazier arrives, a board or strong sheeting usually helps to cover the opening temporarily.
From the blog
Texts that came out of the questions that come up most often about glass.
Broken window: what to do before the glazier arrives
Has a window broken? How to make the opening safe, what not to do with the shards, and what information to have ready so the answer to your enquiry is concrete.
ReadHow to measure glass for a replacement
A guide to measuring glass: the opening versus the pane, measuring in several places, checking the diagonals and why the allowance is the glazier's job.
ReadFloat, toughened, laminated and insulating glass in practice
How the glass types differ in practice: float, toughened and laminated glass and insulating units, how they behave when broken and where each is used.
Read